Reel Power OG's ROV Pipeline Spear was designed to recover the cut or parted end of a pipeline from the ocean floor. It is positioned into the end of the pipeline by an ROV then the ROV engages the slips by moving the slip engagement handle to the proper position. The ROV is also able to disengage the slips if necessary. The pipeline is then lifted to the surface by a cable attached to a pad-eye on the rear of the spear. The Pipeline Spear can be made in any size to fit the ID of your pipeline. The nose section can be fitted with a sealing element to allow the recovered end of the pipeline to be sealed if necessary.